GL-HXS-3G-HD/SDI

Description

This KVideo miniature and high-quality HXS-3G HD/SDI fiber optical transmission system is pathological test compliance, with built-in EQ and reclocking features. It works with either single-mode or multimode fiber cable. Received Optical Power levels. It provides critical system diagnostic information at a glance without a need for additional test equipment.

XS-3G HD/SDI fiber optic transmission system uses its own power supply or any DC voltage from 5 to 16 volt. By using XLR 4 PIN with latch locking mechanism, it

It supports SMPTE 424M/297M (1080p — 2.97Gbps); SMPTE 292M/297M (HDTV — 1.485Gbps); SMPTE 259M/297M (SDTV — 270/360Mbps).

These tiny transmitter and receiver modules can be deployed almost anywhere. The modules include LED indicators to display Power On, HD/SDI signal presence and

can avoid unwanted power interruption. This connection also includes provisions for SNMP monitoring.

APPLICATIONS

• Sports tele-production for Golf, skiing, racing, etc.
• Remote camera links
• Cross-town fiber links
• Cross-campus production
• Pre-installed fiber venues
• OB Van

KEY FEATURES

• Portable, lightweight units
• Reliable, efficientQuick, easy installation
• LED indicators to show you:

Power on

• HD/SDI data presence
• RX Optical power levels
• 19.4 Mbps to 3 Gbps
• SMPTE 424M/297M compliant
• SMPTE 292M/259M/297M compatible
• Supports embedded audio
• Up to 30 km
• Low system jitter
• Power from 5-16 VDC
• Digital diagnostic function
• High durability design
• Class 1 FDA and IEC60825-1 Laser
• Safety Compliant
• Pathological test compliance

Mechanical
Length	3.2 in. (8.13 mm)
Width	0.65 in. (1.65 mm)
Height	0.75 in. (1.91 mm)
Weight, Each End	4 oz (150 g)
Indicators	Power, signal, link, optical power
Electrical
Input Voltage	5~16 VDC
Power Connector	XLR 4Pin  (with latch locking mechanism)
Power Consumption, Each End (typ.)	600mW
Environmental
Operating Temperature	-25° C to +55°C
Relative Humidity	0 to 95%, non-condensing
Video
Transmission Method	Digital
Input Level	800 mV (peak to peak)
Input Impedance	75 ohms
Coax Equalization@270 Mbps	350m
@1.485 Gbps	140m
@ 2.97 Gbps	50m*
Output Impedance	75 ohms
Bit-Error Rate (@ -20 dBm)	10-11
Jitter (pathological data pattern)	< 120 ps
Rise/Fall Times	< 120 ps
* –  Typical equalized length of Belden 1694A cable: 120m at 2.97Gb/s, 200m at 1.485Gb/s, and 350m at 270Mb/s.
Transmission
Operating Wavelength	1310nm standard, (1550nm DFB or 18 Ch. 1270~1610nm CWDMupon request)
Video Connector In/Out	BNC
Optical Connector	ST (standard)
Transmitter Output	-6~0 dBm (0~+3 dBm optional)
Receiver Sensitivity	-20 dBm
Link Margin/Distance	13 dB/5km@3G for singlemode;0.3km for multimode
Fiber Type	Single mode or multimode